View UPG2150T5L07_731497.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

DATA SHEET
GaAs INTEGRATED CIRCUIT
PG2150T5L
SP3T SWITCH FOR Bluetooth
TM
AND 802.11b/g
DESCRIPTION
The PG2150T5L is a GaAs MMIC SP3T switch which was developed for Bluetooth and wireless LAN. This device can operate frequency from 0.5 to 2.5 GHz, having the low insertion loss and high isolation. This device is housed in a 12-pin plastic TSQFN (Thin Small Quad Flat Non-leaded) package. And this package is able to high-density surface mounting.
FEATURES
* Operation frequency * Control voltage * Low insertion loss * High isolation : fopt = 0.5 to 2.5 GHz : Vcont (H) = 2.3 to 3.6 V (2.85 V TYP.) : Vcont (L) = 0.2 to 0.2 V (0 V TYP.) : Lins3 = 0.50 dB TYP. @ f = 2.5 GHz, ANT to RF1, 2, Vcont (H) = 2.85 V, Vcont (L) = 0 V : Lins6 = 0.60 dB TYP. @ f = 2.5 GHz, ANT to RF3, Vcont (H) = 2.85 V, Vcont (L) = 0 V : ISL3 = 35 dB TYP. @ f = 2.5 GHz, ANT to RF3, On port ANT to RF1, 2, RF1 to RF3, On port ANT to RF1, Vcont (H) = 2.85 V, Vcont (L) = 0 V : ISL6 = 18 dB TYP. @ f = 2.5 GHz, ANT to RF1, On port ANT to RF2, 3, ANT to RF2, On port ANT to RF1, 3, Vcont (H) = 2.85 V, Vcont (L) = 0 V * Handling power : Pin (1 dB) = +31.0 dBm TYP. @ f = 2.5 GHz, ANT to RF1, 2, Vcont (H) = 2.85 V, Vcont (L) = 0 V : Pin (1 dB) = +25.0 dBm TYP. @ f = 2.5 GHz, ANT to RF3, Vcont (H) = 2.85 V, Vcont (L) = 0 V * High-density surface mounting : 12-pin plastic TSQFN package (2.0 2.0 0.37 mm)
APPLICATIONS
* Antenna switch for Bluetooth and 802.11b/g
ORDERING INFORMATION
Part Number PG2150T5L-E2 Order Number PG2150T5L-E2-A Package 12-pin plastic TSQFN (Pb-Free) Marking 2150 Supplying Form Embossed tape 8 mm wide Pin 10, 11, 12 face the perforation side of the tape Qty 3 kpcs/reel
Remark To order evaluation samples, contact your nearby sales office. Part number for sample order: PG2150T5L-A
Caution Observe precautions when handling because these devices are sensitive to electrostatic discharge.
The information in this document is subject to change without notice. Before using this document, please confirm that this is the latest version.
Document No. PG10653EJ01V0DS (1st edition) Date Published February 2007 NS CP(N)
2007
PG2150T5L
PIN CONNECTIONS AND INTERNAL BLOCK DIAGRAM
Pin No. 1 Pin Name ANT GND Vcont2 RF2 GND RF3 Vcont3 GND Vcont1 RF1 N.C. N.C.
(Top View)
12 11 10
(Top View)
12 11 10
(Bottom View)
10 11 12
2 3 4
1 2 3
9 8 7
1 2 3
9 8 7
9 8 7
1 2 3
5 6 7 8 9 10 11 12
2150
4 5 6
Vcont1 High Low Low Low High Low Parameter
4
5
6
6
5
4
Remark Exposed pad : GND
TRUTH TABLE
Vcont2 Vcont3 Low Low High ANT RF1 ON OFF OFF ANT RF2 OFF ON OFF ANT RF3 OFF OFF ON
ABSOLUTE MAXIMUM RATINGS (TA = +25 C, unless otherwise specified)
Symbol Vcont Pin1 Pin2 TA Tstg Ratings 6.0 to +6.0 +31.5 +25.5 45 to +85 55 to +150
Note
Unit V dBm dBm C C
Switch Control Voltage Input Power1 (ANT RF1, ANT RF2) Input Power2 (ANT RF3) Operating Ambient Temperature Storage Temperature
Note
Vcont (H)
Vcont (L)
6.0 V
RECOMMENDED OPERATING RANGE (TA = +25 C, unless otherwise specified)
Parameter Operating Frequency Switch Control Voltage (H) Switch Control Voltage (L) Symbol fopt Vcont (H) Vcont (L) MIN. 0.5 2.3 0.2 2.85 0 TYP. MAX. 2.5 3.6 0.2 Unit GHz V V
2
Data Sheet PG10653EJ01V0DS
PG2150T5L
ELECTRICAL CHARACTERISTICS (TA = +25 C, Vcont (H) = 2.85 V, Vcont specified)
Parameter Insertion Loss 1 Insertion Loss 2 Insertion Loss 3 Insertion Loss 4 Insertion Loss 5 Insertion Loss 6 Isolation 1 Symbol Lins1 Lins2 Lins3 Lins4 Lins5 Lins6 ISL1 ANT to RF3 On port ANT to Isolation 2 I S L2 RF1 , 2 RF1 to RF3 Isolation 3 ISL3 On port A NT to RF1 Isolation 4 ISL4 ANT to RF1 On port ANT to Isolation 5 I S L5 RF2 , 3 ANT to RF2 Isolation 6 ISL6 On port A NT to RF1, 3 Input Return Loss Output Return Loss 1 dB Loss Compression Input Power
Note
(L)
= 0 V, DC blocking capacitors = 56 pF, unless otherwise
Pass ANT to RF1, 2
Test Conditions f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz
MIN.
TYP. 0.40 0.45 0.50 0.45 0.55 0.60
MAX. 0.55 0.60 0.65 0.60 0.70 0.75
Unit dB dB dB dB dB dB dB
ANT to RF3
f = 0.5 to 1.0 GHz f = 1.0 to 2.0 GHz f = 2.0 to 2.5 GHz f = 0.5 to 1.0 GHz 29
32
f = 1. 0 t o 2. 0 G H z
29
32
dB
f = 2 . 0 t o 2. 5 G H z
30
35
dB
f = 0.5 to 1.0 GHz
23
26
dB
f = 1. 0 t o 2. 0 G H z
17
20
dB
f = 2 . 0 t o 2. 5 G H z
15
18
dB
RLin RLout Pin (1 dB)
ANT to RF1, 2, 3 ANT to RF1, 2, 3 ANT to RF1, 2
f = 0.5 to 2.5 GHz f = 0.5 to 2.5 GHz f = 1.0 GHz f = 2.0 GHz f = 2. 5 G H z
15 15 +28.0 +28.0 + 28 . 0 +22.0 + 22 . 0 + 22 . 0
20 20 +31.0 +31.0 + 3 1. 0 +25.0 + 2 5. 0 + 2 5. 0 0.05 50 1.0
dB dB dBm dBm dBm dBm dBm dBm A ns
ANT to RF3
f = 1.0 GHz f = 2. 0 G H z f = 2. 5 G H z
Switch Control Current Switch Control Speed
Icont tSW
ANT to RF1, 2, 3 ANT to RF1, 2, 3
RF None 50% CTL to 90/10% RF
Note Pin (1 dB) is measured the input power level when the insertion loss increases more 1 dB than that of linear range.
Data Sheet PG10653EJ01V0DS
3
PG2150T5L
EVALUATION CIRCUIT
RF1
56 pF
12 56 pF ANT 1
11
10
9
Vcont1 1 000 pF
2
8
Vcont2 1 000 pF
3
7
Vcont3 1 000 pF
4
5
6
56 pF
56 pF
RF2
RF3
The application circuits and their parameters are for reference only and are not intended for use in actual design-ins.
4
Data Sheet PG10653EJ01V0DS
PG2150T5L
MOUNTING PAD LAYOUT DIMENSIONS 12-PIN PLASTIC TSQFN (UNIT: mm)
0.38 0.77 0.5 0.77 0.5 0.38
0.99
0.5 12-0.23
0.99
0.5
Remark The mounting pad layouts in this document are for reference only.
0.38
0.77
0.77
0.38
Data Sheet PG10653EJ01V0DS
5
PG2150T5L
PACKAGE DIMENSIONS 12-PIN PLASTIC TSQFN (UNIT: mm)
2.00.1 0.37+0.03 -0.05
2.00.1
(Bottom View)
(C 0.170.07)
0.500.06
0.230.1
0.940.1
Remark ( ) : Reference value
6
Data Sheet PG10653EJ01V0DS
0.940.1
0.23+0.07 -0.05
PG2150T5L
RECOMMENDED SOLDERING CONDITIONS
This product should be soldered and mounted under the following recommended conditions. methods and conditions other than those recommended below, contact your nearby sales office.
Soldering Method Infrared Reflow S o l d e r i n g C ond ition s Peak temperature (package surface temperature) Time at peak temperature Time at temperature of 220 C or higher Preheating time at 120 to 180 C Maximum number of reflow processes Maximum chlorine content of rosin flux (% mass) Wave Soldering Peak temperature (molten solder temperature) Time at peak temperature Maximum number of flow processes Maximum chlorine content of rosin flux (% mass) Partial Heating Peak temperature (terminal temperature) Soldering time (per side of device) Maximum chlorine content of rosin flux (% mass) : 260 C or below : 10 seconds or less : 60 seconds or less : 120 30 seconds : 3 times : 0.2%(Wt.) or below : 260 C or below : 10 seconds or less : 1 time : 0.2%(Wt.) or below : 350 C or below : 3 seconds or less : 0.2%(Wt.) or below HS350 WS260 C on ditio n S ymb ol IR260
For soldering
Preheating temperature (package surface temperature) : 120 C or below
Caution Do not use different soldering methods together (except for partial heating).
Data Sheet PG10653EJ01V0DS
7
PG2150T5L
Bluetooth is a trademark owned by Bluetooth SIG, Inc., U.S.A.
The information in this document is current as of February, 2007. The information is subject to change without notice. For actual design-in, refer to the latest publications of NEC Electronics data sheets or data books, etc., for the most up-to-date specifications of NEC Electronics products. Not all products and/or types are available in every country. Please check with an NEC Electronics sales representative for availability and additional information. No part of this document may be copied or reproduced in any form or by any means without the prior written consent of NEC Electronics. NEC Electronics assumes no responsibility for any errors that may appear in this document. NEC Electronics does not assume any liability for infringement of patents, copyrights or other intellectual property rights of third parties by or arising from the use of NEC Electronics products listed in this document or any other liability arising from the use of such products. No license, express, implied or otherwise, is granted under any patents, copyrights or other intellectual property rights of NEC Electronics or others. Descriptions of circuits, software and other related information in this document are provided for illustrative purposes in semiconductor product operation and application examples. The incorporation of these circuits, software and information in the design of a customer's equipment shall be done under the full responsibility of the customer. NEC Electronics assumes no responsibility for any losses incurred by customers or third parties arising from the use of these circuits, software and information. While NEC Electronics endeavors to enhance the quality, reliability and safety of NEC Electronics products, customers agree and acknowledge that the possibility of defects thereof cannot be eliminated entirely. To minimize risks of damage to property or injury (including death) to persons arising from defects in NEC Electronics products, customers must incorporate sufficient safety measures in their design, such as redundancy, fire-containment and anti-failure features. NEC Electronics products are classified into the following three quality grades: "Standard", "Special" and "Specific". The "Specific" quality grade applies only to NEC Electronics products developed based on a customerdesignated "quality assurance program" for a specific application. The recommended applications of an NEC Electronics product depend on its quality grade, as indicated below. Customers must check the quality grade of each NEC Electronics product before using it in a particular application. "Standard": Computers, office equipment, communications equipment, test and measurement equipment, audio and visual equipment, home electronic appliances, machine tools, personal electronic equipment and industrial robots. "Special": Transportation equipment (automobiles, trains, ships, etc.), traffic control systems, anti-disaster systems, anti-crime systems, safety equipment and medical equipment (not specifically designed for life support). "Specific": Aircraft, aerospace equipment, submersible repeaters, nuclear reactor control systems, life support systems and medical equipment for life support, etc. The quality grade of NEC Electronics products is "Standard" unless otherwise expressly specified in NEC Electronics data sheets or data books, etc. If customers wish to use NEC Electronics products in applications not intended by NEC Electronics, they must contact an NEC Electronics sales representative in advance to determine NEC Electronics' willingness to support a given application. (Note) (1) "NEC Electronics" as used in this statement means NEC Electronics Corporation and also includes its majority-owned subsidiaries. (2) "NEC Electronics products" means any product developed or manufactured by or for NEC Electronics (as defined above).
M8E 02. 11-1
8
Data Sheet PG10653EJ01V0DS
PG2150T5L
Caution
This product uses gallium arsenide (GaAs). GaAs vapor and powder are hazardous to human health if inhaled or ingested, so please observe the following points. * Follow related laws and ordinances when disposing of the product. If there are no applicable laws and/or ordinances, dispose of the product as recommended below. 1. Commission a disposal company able to (with a license to) collect, transport and dispose of materials that contain arsenic and other such industrial waste materials. 2. Exclude the product from general industrial waste and household garbage, and ensure that the product is controlled (as industrial waste subject to special control) up until final disposal. * Do not burn, destroy, cut, crush, or chemically dissolve the product. * Do not lick the product or in any way allow it to enter the mouth.
GaAs Products
4590 Patrick Henry Drive Santa Clara, CA 95054-1817 Telephone: (408) 919-2500 Facsimile: (408) 988-0279
Subject: Compliance with EU Directives
CEL certifies, to its knowledge, that semiconductor and laser products detailed below are compliant with the requirements of European Union (EU) Directive 2002/95/EC Restriction on Use of Hazardous Substances in electrical and electronic equipment (RoHS) and the requirements of EU Directive 2003/11/EC Restriction on Penta and Octa BDE. CEL Pb-free products have the same base part number with a suffix added. The suffix -A indicates that the device is Pb-free. The -AZ suffix is used to designate devices containing Pb which are exempted from the requirement of RoHS directive (*). In all cases the devices have Pb-free terminals. All devices with these suffixes meet the requirements of the RoHS directive. This status is based on CEL's understanding of the EU Directives and knowledge of the materials that go into its products as of the date of disclosure of this information.
Restricted Substance per RoHS Lead (Pb) Mercury Cadmium Hexavalent Chromium PBB PBDE Concentration Limit per RoHS (values are not yet fixed) < 1000 PPM < 1000 PPM < 100 PPM < 1000 PPM < 1000 PPM < 1000 PPM Concentration contained in CEL devices -A Not Detected Not Detected Not Detected Not Detected Not Detected Not Detected -AZ (*)
If you should have any additional questions regarding our devices and compliance to environmental standards, please do not hesitate to contact your local representative.
Important Information and Disclaimer: Information provided by CEL on its website or in other communications concerting the substance content of its products represents knowledge and belief as of the date that it is provided. CEL bases its knowledge and belief on information provided by third parties and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. CEL has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. CEL and CEL suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall CEL's liability arising out of such information exceed the total purchase price of the CEL part(s) at issue sold by CEL to customer on an annual basis. See CEL Terms and Conditions for additional clarification of warranties and liability.

▲Up To Search▲

Price & Availability of UPG2150T5L07

	To Download UPG2150T5L07 Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .